§22A-2-31. Transportation of explosives.
Individual containers used to carry permissible explosives or detonators shall be constructed of substantial, nonconductive materials, kept closed and maintained in good condition. When explosives or detonators are transported underground in cars moved by means of locomotives, ropes, or other motive power, they shall be in substantially covered cars or in special substantially built covered containers used specifically for transporting detonators or explosives. Any container used for transportation or storage of explosives shall be properly identified or marked. Explosives or detonators shall not be hauled into or out of a mine within five minutes preceding or following a man trip. Where explosives and detonators are transported underground by belts, they shall be handled in the following manner: In the original and unopened cases, in special closed cases constructed of nonconductive material, or in suitable, individual containers. Clearance requirements shall be a minimum of eighteen inches; stop controls shall be provided at loading and unloading points, and an attendant shall supervise the loading and unloading. Neither explosives nor detonators shall be transported on flight or shaking conveyors, mechanical loading machines, locomotives, scrapers, cutting machines, drill trucks, or any self-propelled mobile equipment. If explosives and detonators are transported in the same explosives car or in the same special container, they shall be separated by at least four inches of hardwood partition or the equivalent; the bodies of such cars or containers shall be constructed or lined with nonconductive material. No hand loader shall take into any mine any larger quantity of explosives or detonators than he may reasonably expect to use in any one shift.