(1) Any person who installs a community water system, noncommunity nontransient water system, transient water system, commercial well, industrial or test well, shall notify the secretary of his or her intent to drill a water well no less than ten days prior to commencement of drilling. The ten-day notice is the responsibility of the owner, but may be given by the drilling contractor.
(2) The secretary has the authority to gather data, including driller and geologist logs, run electric and other remote-sensing logs and devices and perform physical characteristics tests on nonresidential and multifamily water wells.
(3) The drilling contractor shall submit to the secretary a copy of the well completion forms submitted to the Division of Health for a community water system, noncommunity nontransient water system, transient water system, commercial well, industrial or test well. The drilling contractor shall provide the well GPS location on the well report.
(4) Any person who fails to notify the secretary prior to drilling a well or impedes collection of information by the secretary under this section is in violation of the Water Resources Protection and Management Act and is subject to the civil administrative penalty authorized by section six of this article.
(5) Any well contracted for construction by the secretary for groundwater or geological testing must be constructed at a minimum to well design standards as promulgated by the Division of Health. Any wells contracted for construction by the secretary for groundwater or geological testing that would at a later date be converted to a public use water well must be constructed to comport to state public water design standards.
The WV Code Online is an unofficial copy of the annotated WV Code, provided as a convenience. It has NOT been edited for publication, and is not in any way official or authoritative.